Sept Sales OBDSTAR D800 A + B + C + D Full Configuration Intelligent Diagnosis for Marine (Jet Ski/ Outboard/ Inboard/ Generator)

OBDSTAR D800 A+B+C+D Full Configuration for Marine (Jet Ski/ Outboard/ Inboard/ Generator)

D800 has the following configurations

A: Jet ski    B: Outboard    C: Inboard    D: Generator

D800 A+B: Jet ski, Outboard
D800 C+D: Inboard, Generator
D800 A+B+C+D: Jet ski, Outboard, Inboard, Generator
More details, please check the software configurations in 'Specifications' and the coverages in 'Function Manual'.


Description for D800 A + B + C + D

D800 is OBDSTAR's new generation device for marine (jet ski/ outboard/ inboard/ generator) intelligent diagnosis.

Based on Samsung Exynos processor, it is equipped with an 8-inch display screen, which is extremely fast and smooth. 

D800 adopts the latest 3.0 APK platform and has shortcut functions such as auto-identification, intelligent retrieval, and one-click feedback. The D800 marine scanner, with its fast upgrade performance and built-in help materials, is a good helper for marine maintenance engineers!
Check D800 User Manual


D800 Advanced Function
 

1. The OBDSTAR mobile APP integrates functions such as diag socket location, flash code query, technical bulletin, manual service function(service lamp reset), basic parameters, etc., working with D800 to make marine diagnosis more accurately and efficiently (some functions are only available for D800 users to check for free);
2. The exclusive interactive wiring diagram and electrical appliance description query function make your diagnosis worry-free;
3. Various data flow display modes such as text, waveform diagram and instrument diagram allow you to easily analyze faults;
4. Supports Auto Scan, Active Trim Configuration, Active Trim GPS Configuration, Auxiliary Joystick Configuration, BCM Simulator, Compass Configuration, Device Initialization, Drive Alignment, Helm Setup, Instance Setting, Maintenance Setting, Merc TDS Reset, Remote Control Reset, Set Engine Location, Set Tach Link, Set Tilt Limit, SMUX Configuration, Steering Wheel Centering, System Calibration, Torque Adjustment, Trackpad Configuration, Vessel Personality and other functions.

D800 Support Functions
 

1. New android operation system;
2. Simple and intuitive menu guidance allows you to quickly master the equipment operation;
3. Provide complete diagnostic functions including ECU information, code reading, code clearing, data flow, freeze frames, action test, setting, coding, read working hours etc;
4. Record and play back real-time flow, quickly and accurately locate sensor and component faults;
5. Wi-Fi connection to the internet, one-click software upgrade;
6. One-click remote function, OBDSTAR technical staff remote assistance.

Supported Brands

AIQIDI, CATERPILLAR, CFMOTO, CRUSADER ENGINES, CUMMINS MARINE, CUMMINS MERCRUISER DIESEL, DAEDONG, DAF MARINE, EVINRUDE, FLAGSHIP, FNM MARINE, FORD MARINE, FPT (Fiat Powertrain Technologies), HIDEA, HONDA, HYUNDAI SEASALL, ILMOR, INDMAR, JOHNSON, KAWASAKI, KODIAK MARINE, LOMBARDINI MARINE, MALIBU, MAN MARINE, MARINER, MARINE POWER, MERCRUISER, MERCURY, MERCURY DIESEL, MTU, PARSUN, PANTHER AIRBOATS, PCM Marine Engines, PERKINS, SCANIA MARINE, SEA-DOO(BRP), SELVA MARINE, SEVEN MARINE, SISU, STEYR MOTORS, SUZUKI, TOHATSU, TOYOTA MARINE, TURNKEY, VM MOTORI, VOLKSWAGEN, VOLVO PENTA, YAMAHA, YANMAR...
More functions are under development...
Check D800 Support List 


D800 Latest Update information

Cluster Recalibration Software

 BRP【Version:V40.07】
 Add Mileage Calibration function for below models:
 ● BRP SEA DO0 ● BRP SKI DO0

Marine Diag Software Update

MERCURY [Version:V31.20]

1.Add below functions:
● Thruster Control
·Steering Bleed Steerable Gearcase
● Trim Relay
·Steering Drain
●Transmission Value
● Transmission Shift
●Auto Test action

2.Add below special functions:
·Maintenance
·SMUX Configuration
·Autopilot Configuration
● Trackpad Configuration
·Transmission Characteristics
·Confirm Vessel Harnessing
●Fathom ll Enable
● Tller Adapt
·Steering System to DTS

3.Optimized software.

VOLVO【Version:V31.12】
 1.Add Parameter Programming function.
 2.Add parameter programming special function,support below programmable parameters:
 ●9D:Road speed limit,mandated by law
 ●AIS:Injector cylinder 1,calibration
 ●AIT:Injector cylinder2,calibration
 ·AlU:Injector cylinder 3,calibration
 ● AIV:Injector cylinder 4,calibration
 ● AIW:Injector cylinder 5,calibration
 ·AIX:Injector cylinder 6,calibration
 ●AlZ:Fuel consumption,calibration percent
 ● AJ:Diff RSL,enable/disable
 ·AJM:Full load calibration,in production
 ●AU:Maxengine speed stationary
 ● AZO:Enable High End Governor Engine Speed
 ●AZQ:High gear ratio end governor engine speed
 ●AZR:Max espd,gear ratio setting
 ●AZS:Max espd,gearratio for limited max espd
 ● BNQ:Max engine speed at speed error
 ● BNS:Governor mode
 ● BNT:Overspeed limit
 ● BNW:Overspeed shutdown
 ● BNX:Oil temperature warning
 ● BPA:Coolant temperature warning
 ● BPD:Idle engine speed
 ● BPG:Idle speed voltage
 ● BPJ:Max speed voltage
 ● BPM:Lamp test
 ● BPN:Governor droop
 ● BPQ:Preheat on ignition
 ● BPR:Coolant level derate
 ● BPS:Oil pressure derate
 ● BPT:Coolant temperature derate
 ● BPU:Governor gradient
 ● BQA:Oil temperature derate
 ● BQB:Boosttemperature derate
 ● BQF:Stop function EMS,Energized to
 ● BQK:Exhaust temperature derating disabled
 ● CNR:PTO governor gradient used
 ● DKR:Injector class
 ● DN:Cust data,Fleet ID
 ● DV:Diff RSL,max vspd next highest gear
 ● DX:Cust data,engine ECU password
 ● DYG:Adjustmentfactor for high I-gain of espd governor
 ● DYH:Adjustment factor for low I-gain ofespd governor
 ● DYI:Adjustment factor for low P-gain of espd governor
 ● DYJ:Adjustment factor for low D-gain of espd governor
 ● DYK:Adjustment factor for high P-gain of espd governor
 ● DYL:Adjustment factor for high D-gain of espd governor
 ● DYM:Enable flag forlower torque limit
 ●ECQ:Crankcase pressure derating disabled
 ●ECR:Piston cooling pressure deratingdisabled
 ●ECT:Boost pressure derating disabled
 ●EG:Engine oil temperature
 ● FMF:Oil temperature derating disabled
 ● FMG:Boost temperature derating disabled
 ● FMH:Coolant level derating disabled
 ● FMI:Oil pressurederating disabled
 ● FMJ:Coolant temperature derating disabled
 ● FSN:Oil temperature warning limit
 ● FSO:Coolant temperature warning limit
 ● FSQ:Cylinder balancing forced status
 ● FVS:Engine Protection -Oil Pressure Shutdown
 ● FVU:Engine Protection -Coolant Level Shutdown
 ● FVW:Engine Protection-Coolant Temp Shutdown
 ● FVY:Engine Protection-Trans Temp Shutdown
 ● GFF:Total injected fuel quantity
 ● GFG:Rail pressure set-point
 ● GFH:PRV total opened time
 ● GHA:Engine ProtectionOil Temp Shutdown
 ● IAW:Stop fuel EMS,Energized to
 ● ISD:Low battery alarm level
 ● ITX:Enable AutomaticAt Speed Regeneration
 ● ITY:Enable Inhibit Regeneration
 ● ITZ:Enable Man Stat Regeneration
 ● IUA:CM1 diag from Cluster
 ● IUC:CM1 diag from DPF Smart Switch
 ● IUE:Enable Man Moving Regeneration
 ● IUI:Request reset when faultycomponent replaced
 ● JAA:The PTO is driveshaft
 ● JAC:Enable Manual Regen During PTO
 ● JXC:PTO Governor Type
 ●MUR:Enable High Pressure Fuel Pump Failure Diagnosis
 ● NMI:DEF Dosing Injector Derating Disabled
 ● NMW:Enable Energized To Run
 ● PDC:Application Type Industrial
 ● PDD:Application Type Marine
 ● QHP:Battery Usage
 ● RRA:E-key,Keyfob not Required,Enable
 ● VIN:Vehicle IdentificationNumber
 ● YA:Idle speed,setting

YANMAR [Version:V31.04]
1.Add system freeze frame function for below models:
●4JH110
●4LV250
●4JH45
·6LY3_ETA
●4JH57
·6LY3_ETP
●4JH80
·6LY3_STA
●4LV150
·6LY3_STP
●4LV170
●8LV-320/320Z
●4LV195
●8LV-350/350Z
●4LV230
·8LV-370/370Z

2.Optimized software
 

5) Data Flow Text/Waveform Diagram/Instrument Diagram













6) Special Functions-BRP





7) Special Functions-CUMMINS





8) Special Functions-EVINRUDE



9) Special Functions-HONDA



10) Special Functions-JOHNSON



11) Special Functions-MAN



12) Special Functions-MERCURY















13) Special Functions-SUZUKI











14) Special Functions-TOHATSU



15) Special Functions-VOLVO







16) Special Functions-YAMAHA



Specifications
 

Operation system	Android 5.1.1
CPU	Exynos4418 qual core ARM cortex A9
Battery	3700mA, rechargeable polymer lithium battery
Extension memory card	32G micro SD (TF) card supported
Storage capacity	32GB
LCD	8.0 inch
LCD resolution	1280*800
Touch screen	Capacitive touch screen
Wifi	Supported
Camera	5 mega rear view camera
Working temperature	-10℃～55℃ (14℉～131℉)
Storage temperature	-20℃～70℃ (-4℉～158℉)
Weight	1kg (main unit)
Dimension	254mm*174mm*35mm

D800 Software Configurations






Package Includes：

1pc x Tablet

Live Support: Chat with us online
TEL: +86 13983755934